How to Change LG Refrigerator Water Filter

There are some very simple steps that you need to take in order to replace the water filter on your LG refrigerator. However, you need to be prepared to spend a few minutes in doing so. That is the only way that you will be able to enjoy your newly filtered water.

Replace the LT600P water filter

Having a refrigerator that has a water filter is a must if you want to ensure you are drinking the cleanest water possible. Using the proper filter will also prolong the life of your fridge. Whether it is the LT600P or the LS600P, you can rest assured that you are getting a quality product.

Aside from a proper filter, you should have a properly functioning water dispenser as well. The dispenser should be flushed at least once a month to avoid rust and bacteria build up. This is a good time to reset the indicator light on the dispenser. To do this, you should hold the button on the side of the dispenser for at least three seconds. Once the dispenser is clear of the water, you can re-fill it with fresh water.

Another item to consider is a kitchen air filter. Designed to enhance LG appliances, these are a great way to keep your kitchen smelling fresh. Kitchen accessories are designed to be there when you need them. They also feature LG’s signature innovation.

While the newest LG LT600P refrigerator may have a fancy water filter, you are still going to have to perform a little maintenance in order to maintain its optimal performance. You should also make sure you have a few spare replacement parts on hand. Replacement parts aren’t difficult to find as you can buy them at your local home improvement store. If you need more help, you can also take advantage of the handy phone app on LG’s website. In the app, you can order replacement parts, find out more about your appliance and receive warranty information.

Lastly, a good replacement water filter should last you for up to 6 months. It’s a good idea to replace it as often as your refrigerator needs it, however. One easy solution is to purchase a refrigerator water filter that fits both the LT600P and LS600P models. These filters are available at Walmart and at many other retail outlets.

refrigerator in the kitchen
Photo by Nastuh Abootalebi on Unsplash

Remove the old water filter

When you decide to replace the water filter in your LG refrigerator, you might have a few questions about the process. While it might seem intimidating, it’s not as difficult as you might think. You just have to follow a few steps to do it.

First, you’ll need to unplug your appliance. This will allow you to access the water filter cap, which is usually located on the left side of your refrigerator. Once you are able to see the cap, you should use standard pliers to remove it.

Next, you’ll need to remove the top shelf of the refrigerator. This is easiest if you tilt the shelf upward and pull straight out. After doing that, you should also be able to remove the lamp cover and pull it to the front.

When you remove the water filter, you might notice that there is still some residual water inside. If you find this to be the case, you should flush the system with 2.5 gallons of water. This will help to loosen up the air lock, and your filter should be easier to remove.

Next, you’ll want to make sure that your LG refrigerator is not clogged with debris. It is also important that your filter is not obstructed by a water valve.

After you’ve cleaned the filter, you can insert the new one. Make sure that it’s in the right direction and is twisted properly.

In addition, you’ll want to run the water through it to flush out any leftover contaminants. Finally, you should be able to close the lid.

Once you’re done, you should be able to enjoy clean, fresh tasting water. However, if you’re not sure how to do this, it might be best to get a professional service to do the job. The professionals at Mid America Service can take care of this for you.

For additional assistance, you can consult your LG owner’s manual. It will contain specific instructions. Also, you can contact the manufacturer’s customer support department for more help.

When you change the filter in your LG refrigerator, be sure to remove any o-rings and protective covers that may be attached.

Reset the water filter light

If you’re using an LG refrigerator and the water filter light is tripping you up, you may want to try a reset. However, it may not work.

Most LG refrigerators have an indicator that will tell you if the water filter is dirty or if it needs to be changed. The light is usually located on the top door of the fridge, near the bottom.

Depending on the model, you may be able to reset the light by holding down a button. Some models even have a dedicated button for resetting the indicator. Other models will need to be manually reset.

Before you can begin a reset, you will first need to remove the water filter. This should be done using the manual that came with your refrigerator. You can also contact a professional service to help with this step.

Alternatively, you can check the owner’s manual for a specific model. This will provide the correct instructions for resetting the water filter indicator.

If you’ve tried resetting the water filter light on your LG refrigerator and it is still tripping you up, you might need to replace the filter. Once you’ve made the change, the light will be back on.

clean water in the fridge
Image by Unsplash+

After changing the filter, make sure to re-tighten the seal. It might be loose or have moved when you were uninstalling the old filter.

Depending on the model, you will also need to reset the air filter indicator. This can be done by pressing the reset button for three seconds. Another method is to touch the MAX ICE and MAX COOL together for three seconds.

Lastly, you’ll need to turn on the inside lights. This is a very simple step. Many refrigerators have a dedicated button. Others have an indicator that is based on the time. For instance, a light that is green might mean it’s time to change the air filter, while one that is red means the filter is too dirty to operate.

If your LG refrigerator is showing the water filter light, you can either reset the light by pushing a button, or you can call LG Support. They’re available around the clock and can help you with any problems you encounter.

Reuse the old water filter

You may be wondering how to recycle the old refrigerator water filter. There are plenty of ways to do this.

First, you may want to check with your local recycling center. Some will accept refrigerator water filters. Others will not.

Your best option is to recycle the filter. You can find out more about the recycling program from the manufacturer of your water filter.

If you aren’t able to get your filter to be recycled, you can try to sell it. A good place to sell it online is eBay. But make sure to do it responsibly.

Another option is to use it in your garden. In addition to helping you save money, reusing the filter can also protect the environment.

To reuse the filter, you must first clean it. Use a gentle cleansing solution. Rinse the filter with a stream of water. Then, seal the cartridge holes with a rubber piece.

When it is clean, remove the filter from its housing. Next, drill a hole at the bottom of the cartridge. Place it back in the housing. Seal it with a cork or a piece of rubber.

If you don’t have a local recycling facility nearby, you can arrange for a paid recycling service. These options are easy to arrange from the comfort of your own home.

Reuse and recycle is a great way to reduce the amount of waste that ends up in landfills. This is especially true if you don’t have access to free recycling programs.

If you’re unable to find a recycling facility, you can still recycle your old refrigerator water filter. PUR offers a recycling program for its filters. It partners with RecycleNation. Just fill in your ZIP code, and they will send you a map of nearby recycling locations.

RecycleNation can also help you find a paid recycling option that works with your filter. They’ll even accept Samsung water filters.

Recycling the refrigerator water filter is a great way to minimize your impact on the environment. And by doing so, you’ll improve the taste of your drinking water.